We've long liked the idea of a pressed tin ceiling for our bathroom and loo. In fact, we had planned for it from the start, or at least we thought we had. The hiccough we hadn't anticipated was the cost of freight - which brought the cost of materials to well over $1,500 before installation and finishing. We really couldn't bring ourselves to spend that much and there didn't seem to be any viable second hand alternatives around.
We'd resigned ourselves to a garden variety plaster ceiling when I mentioned it to my brother. Stagger me if it didn't turn out that he had a house worth of pressed tin that he had picked up 30 years ago from a demolition in our home town, Grenfell. Not only did it have provenance (last century the owner had been my pre-school teacher) the price was right. All he wanted was a set of white rear louvers for a 1956 FC Holden sedan. How hard could that be?
With hindsight, the price was very much higher (and I still haven't found those louvers) . Each sheet had three coats of enamel paint which needed removing along with 80 years of dust on the upper side. All rust had to be treated, edges radiused and dents panel beaten. Then followed an undercoat of red oxide primer and 3 top coats of white gloss. Total time per sheet - don't even ask, but suffice to say that's two weeks of my life I won't get back!
|Pressed tin in the bathroom|
Installing it brought its own challenges, particularly for two vertically challenged builders like Jeanette and I. But I have to say the end result is just what we were after.
We still have the cornice to go - I'm wondering about carving an egg and dart design into Tassie Oak. But I hope I talk myself out of it!